$30 Bucks or Less Online Safety Training
Table of Contents
Toggle
$30 Bucks or Less Online Safety Training
Free or $30 Bucks or Less Online Safety Training for Construction, Industry, Trades Workers, and more is a good deal. With a few dozen courses listed here, getting a start on your safety at work is easy. In addition, the majority of our other courses are between $49 and $79.
more online training in various different industries and occupations, go have a look at the store.
You can also read our articles at
Are Internet Safety Courses Accepted in BC?
Is Online Safety Training BETTER than Traditional Classroom Training?
Free Construction Training
Occupational Health And Safety Awareness For Supervisors in 5 Steps
Free Safety Training
The Occupational health and safety awareness training provides a basic understanding of the Occupational Health and Safety Act (OHSA) and does not replace any sector-specific, hazard-specific, or competency-specific training.
This training introduces supervisors to the Occupational Health and Safety Act. It focuses on the health and safety rights and responsibilities of workers, supervisors, and employers. It also serves as a general introduction to workplace health and safety.
Supervisors can use this free training program as one way to meet the minimum training required by the Occupational Health and Safety Awareness and Training regulation.
The program can be completed using the workbook or the eLearning module.
-
-
-
-
- Make a Difference
- Lead the way
- The Supervisor's Tool Kit
- You Are Not Alone
- Be a Role Model
-
-
-
Approximately 60 minutes
Worker Health and Safety Awareness in 4 Steps
The Occupational health and safety awareness training provides a basic understanding of the Occupational Health and Safety Act (OHSA) and does not replace any sector-specific, hazard-specific, or competency-specific training.
This training introduces workers to the Occupational Health and Safety Act. It focuses on the health and safety rights and responsibilities of workers, supervisors, and employers. It also serves as a general introduction to workplace health and safety.
Workers can use this free training program as one way to meet the minimum training required by the Occupational Health and Safety Awareness and Training regulation.
The program can be completed using the workbook or the eLearning module.
- Get On Board
- Get in the Know
- Get Involved
- Get More Help
Approximately 60 minutes
Aerial Boom & Scissor Lift Pre-Shift Inspections
Free Safety Training
This micro-learning module is part of the Mobile Equipment Pre-Shift Inspection Series. This short course covers the basics of pre-shift inspections for aerial platforms. Great for refreshers or toolbox talks/tailgate meetings!
- The importance of pre-operational inspections
- Walk-around inspection requirements
- Ground and platform control function tests
Approximately 15 minutes
Skid Steer Loader Pre-Shift Inspection
Free Safety Training
This micro-learning module is part of the Mobile Equipment Pre-Shift Inspection Series. This short course covers the basics of pre-shift inspections for skid steer loaders. Great for refreshers or toolbox talks/tailgate meetings!
- Worksite hazards to be aware of during site inspections
- Requirements for walk-around inspections
Approximately 10 minutes
Telehandler / Variable Reach Forklift Pre-Shift Inspection
Free Safety Training
This micro-learning module is part of the Mobile Equipment Pre-Shift Inspection Series. This short course covers the basics of pre-shift inspections for telehandlers (or variable reach forklifts). Great for refreshers or toolbox talks/tailgate meetings!
- Appropriate PPE
- Site inspections
- Walk-around inspections
- Function checks
Approximately 10 minutes
Crane and Hoist Hand Signals
Free Safety Training
This micro-learning module covers crane and hoists hand signals and the best practices for signaling at a glance. Great for refreshers or toolbox talks/tailgate meetings!
- Signaling best practices
- Signalperson responsibilities
- International Hand Signals, including slow, travel, and overhead crane signals
Approximately 10 minutes
Wire Rope Rigging Inspection & Replacement
Free Safety Training
This micro-learning module covers the basics of wire rope inspections and how to know when a wire rope needs replacing. Great for refreshers or toolbox talks/tailgate meetings!
- Construction stretch and diameter reduction
- How to measure a wire rope's length and diameter
- Scheduled inspections (daily, monthly, and quarterly/periodic)
- Removal criteria, including broken wires, wear, kinks, and stretch
Approximately 10 minutes
Canada * Red Deer * Alberta * Edmonton * Calgary
Blackfalds * Lacombe Sylvan Lake * Innisfail * Rocky Mountain House * Ponoka
Camrose * Sherwood Park * Grande Prairie * Lethbridge * Medicine Hat
B.C.* Metro Vancouver * Fraser Valley Regional District * Agassiz * Abbotsford * North Vancouver * Vancouver * Burnaby
New Westminster * Richmond * Delta* Surrey * Langley * Port Moody * Coquitlam
Pitt Meadows * Maple Ridge * Mission * Chilliwack * Hope * Lower Mainland
Fraser Valley * Okanagan * British Columbia
Free and Under $30.00 Online Safety Training
Below are more Online Safety Courses Under $30.00.
$30 Bucks or Less Online Safety Training
$30 Bucks or Less Online Safety Training Courses for construction, Industry, Trades Workers, and more. BC, Alberta, Canada
Course Provider: Organization
Course Provider Name: FreeBird Safety Services
Course Provider URL: https://freebirdsafetyservices.ca/
5